EN ISO 4651:1995 PDF

Name: EN ISO 4651:1995 — Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988)
SKU: EN ISO 4651:1995
Price: 60.09 EUR
Availability: InStock

Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988)

Название (английский):

EN ISO 4651:1995

Cellular rubbers and plastics - Determination of dynamic cushioning performance (ISO 4651:1988)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 13
Дата публикации:: 15 мая 1995 г.
Издание:: CEN EN 4651 edition 1 version 1
ICS:: 83.100

Тип поставки:

Full version195 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:195 €

Описание (английский):

Defines a method measuring the peak deceleration of a mass when it is dropped on a test piece. The test described is intended primarily for quality assurance; however, an annex contains notes to be considered if the test is used to obtain design data. Two figures show typical arrangements.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 4651:1995 (ISO 4651:1988) specifies a laboratory method for assessing the dynamic cushioning performance of cellular rubbers and cellular plastics used in packaging. The standard measures the peak deceleration of a mass (drop hammer) when it impacts a test piece. The procedure is intended primarily for quality assurance, while an informative annex provides notes for using the test to obtain design data. Typical apparatus arrangements (guided vertical drop tester and pendulum tester) are illustrated.

Key topics and requirements

Test principle: measure peak deceleration of a drop hammer impacting a specimen to characterise cushioning behaviour (dynamic stress, strain, displacement curves).

Test pieces: rectangular specimens, nominal 150 × 150 × 50 mm (thickness ±5 mm); cutting must not alter dynamic properties (no hot-wire cutting); set of at least ten specimens.

Impacts and repeats: each specimen is impacted three times at fixed velocity and static stress; peak deceleration is recorded on first and third impacts; allow recovery and remeasure thickness.

Impact velocities: two standard equivalent free-fall heights - 250 mm and 750 mm (1250 mm optional). Hammer velocity must be ≥95% of equivalent free-fall velocity.

Static stress: choose several static stress values (typically five) distributed to identify minimum and ±10–20% response points; number of stresses may be reduced by agreement.

Apparatus & recording: use a drop hammer with an anvil (anvil mass ≥100× hammer), transducer mounted centrally on the hammer, and recording electronics. Transducers may be piezoelectric or strain-gauge; frequency response and damping must be adequate to measure transient deceleration pulses within ±5% accuracy.

Conditioning: specimens conditioned per referenced standards (e.g., ISO 291, ISO 471) - recommended 23 °C ±2 °C and 50% ±5% RH.

Data and corrections: corrected peak deceleration accounts for deviations from the reference thickness (50 mm); displacement and dynamic compression diagrams can be derived (annex A).

Practical applications

Quality control and acceptance testing of packaging foams and cushioning materials

Comparative material evaluation for shock absorption and impact protection

Input data for packaging design when combined with annex guidance (selection of cushioning for fragile goods)

Research and development for cellular rubbers and plastics

EN ISO 4651:1995 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Practical applications

Who uses this standard

Related standards

Технические детали

ISO 4651:1988

Cellular rubbers and plastics — Determination of dynamic cushioning performance

BS ISO 2910:2018

Cinematography. Screen luminance and chrominance for the projection of film motion pictures.

ISO 4716:2002

Oil of vetiver (Vetiveria zizanioides (L.) Nash)

ISO 8455:2011/Amd 1:2015

Green coffee — Guidelines for storage and transport — Amendment 1

BS EN ISO 19232-5:2018

Non-destructive testing. Image quality of radiographs. Determination of the image unsharpness and basic spati…

SIST EN ISO 22313:2020

Security and resilience - Business continuity management systems - Guidance on the use of ISO 22301 (ISO 2231…

ISO 3205:1976

Preferred test temperatures

ISO 4651:1988/Amd 1:2006

Cellular rubbers and plastics — Determination of dynamic cushioning performance — Amendment 1