EN ISO 5832-3:2021 PDF

Name: EN ISO 5832-3:2021 — Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2021)
SKU: EN ISO 5832-3:2021
Price: 60.09 EUR
Availability: InStock

Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2021)

Название (английский):

EN ISO 5832-3:2021

Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2021)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 16
Дата публикации:: 1 декабря 2021 г.
Издание:: CEN EN 5832 edition 2 version 1
ICS:: 11.040.40

Тип поставки:

Full version240 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:240 €

Описание (английский):

This document specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti-6Al-4V alloy) for use in the manufacture of surgical implants. NOTE The mechanical properties of a sample obtained from a finished product made of this alloy might not necessarily comply with the specifications given in this document.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN ISO 5832-3:2021 - "Implants for surgery - Metallic materials - Part 3: Wrought titanium 6‑aluminium 4‑vanadium alloy (Ti‑6Al‑4V)" is the international/CEN standard that defines the required chemical, microstructural and mechanical characteristics and the corresponding test methods for wrought Ti‑6Al‑4V used in the manufacture of surgical implants. The standard covers raw implant material (not finished devices) and specifies how conformity is tested and reported. It is the 2021 revision adopted by CEN (supersedes the 2016 edition).

Key topics and requirements

Chemical composition (representative heat analysis):

Aluminium: 5.5–6.75%
Vanadium: 3.5–4.5%
Iron: ≤ 0.3%
Oxygen: ≤ 0.2%
Carbon: ≤ 0.08%
Nitrogen: ≤ 0.05%
Hydrogen: ≤ 0.015% (billets: ≤ 0.010%)
Titanium: balance

Microstructure: required to be equiaxed alpha or elongated primary alpha in a transformed beta matrix, with no continuous alpha network at prior beta grain boundaries. Round bar transverse microstructures are referenced to photomicrographs A1–A9 in ISO 20160.

Mechanical properties (annealed condition):

Tensile strength (Rm): ≥ 860 MPa
Proof/yield strength (Rp0.2): ≥ 780 MPa
Elongation after fracture: ≥ 8% for sheet/strip, ≥ 10% for bar
Bend test: sheet/strip must show no cracking; mandrel diameter = 10 × thickness (t)

Test methods and references: tensile testing per ISO 6892‑1, bend testing per ISO 7438, microstructure per ISO 20160, and other recognized analytical procedures for chemical analysis.

Conformity rules: retest rules, specimen gauge length reporting, and the note that finished product properties may differ from raw material test results.

Applications and who uses it

Material suppliers and mill producers specifying and certifying Ti‑6Al‑4V for implant-grade raw stock (bars, sheets, billets).

Medical device manufacturers and implant designers using wrought titanium for orthopaedic, dental and other surgical implants.

Testing and inspection laboratories performing chemical, microstructural and mechanical conformity tests.

Regulatory and procurement teams verifying material compliance in device technical files.

R&D and metallurgical engineers comparing ISO and ASTM harmonization (Annex B) when selecting grades or sourcing international material.

Related standards

ISO 6892‑1 - Tensile testing of metallic materials (room temperature)

ISO 7438 - Bend test for metallic materials

ISO 20160 - Classification of alpha+beta titanium alloy microstructures

ASTM specifications referenced for ELI-grade details (see Annex notes for harmonization)

EN ISO 5832‑3:2021 is essential when specifying implant-grade wrought Ti‑6Al‑4V to ensure consistent chemistry, microstructure and mechanical performance and to support traceable testing and regulatory compliance.

EN ISO 5832-3:2021 PDF

Abstract

Похожие стандарты

Overview

Key topics and requirements

Applications and who uses it

Related standards

Технические детали

ISO 5832-3:2021

Implants for surgery — Metallic materials — Part 3: Wrought titanium 6-aluminium 4-vanadium alloy

ISO 20160:2006

Implants for surgery — Metallic materials — Classification of microstructures for alpha+beta titanium alloy b…

SIST EN ISO 6892-1:2020

Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)

SIST EN ISO 7438:2021

Metallic materials - Bend test (ISO 7438:2020)