ISO 10964:1993 PDF

Name: ISO 10964:1993 — Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners
SKU: ISO 10964:1993
Price: 25 EUR
Availability: InStock

Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners

Название (английский):

ISO 10964:1993

Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 12 августа 1993 г.
Издание:: ISO IS 10964 edition 1 version 1
ICS:: 83.180

Тип поставки:

Full version60 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

The test method described is used to make comparative assessments of the securing or locking effect of anaerobic adhesives. It may be used for other types of adhesives. Its principle is determining the torque required to unscrew a bonded nut and bolt assembly, including the initial torque required to break the bond, and the torque measured after turning the nut 180°.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 10964:1993 is an international standard developed by the International Organization for Standardization (ISO) that specifies a test method for determining the torque strength of anaerobic adhesives on threaded fasteners. This standard focuses on evaluating the securing or locking effectiveness of anaerobic adhesives used in bolted assemblies by measuring the torque required to unscrew a nut and bolt bonded with adhesive.

The method is primarily designed for anaerobic adhesives but may also be applicable to other adhesive types if agreed upon by the testing parties. By quantifying parameters such as breakaway torque and prevailing torque, ISO 10964 assists in assessing the reliability and performance of adhesive-secured threaded fasteners.

Key Topics

Scope of Testing The test method evaluates the locking effect of anaerobic adhesives on threaded fasteners, determining torque values to break and overcome the adhesive bond between nuts and bolts.

Torque Measurements Defined

On Torque (TON): Maximum torque needed to screw the nut onto an adhesive-coated bolt.
Breakaway Torque (TBA): Initial torque required to start unscrewing and break the bond in an unseated assembly.
Breakloose Torque (TBL): Initial torque required to reduce or eliminate axial load in preloaded assemblies.
Prevailing Torque (TP): Torque measured after bond breakage, usually at a 180° nut rotation.

Test Apparatus and Conditions Test setups include machines with graphic recording or direct reading torque wrenches. Fasteners are typically Ml 0 x 38 dimension, property class 8.8 bolts and nuts made from zinc-phosphated steel per ISO 898 standards. Specific environmental conditioning per ISO 291 ensures consistent results.

Sample Preparation and Adhesive Application Fasteners must be degreased, free of burrs or damage, and prepared in standard laboratory atmospheres. Adhesive is applied to bolt threads and nut surfaces covering an area equal to the nut height plus two threads.

Test Procedure Nuts are assembled to bolt under specified conditions (unseated or preloaded), and torque measurements are recorded while unscrewing at controlled speeds (2, 5, or 10 rpm). Data collected include breakaway, breakloose, and prevailing torques.

Reporting Requirements Comprehensive documentation includes adhesive identification, test conditions, equipment details, torque values, test speed, and specimen data to ensure reproducibility and traceability.

Applications

Quality Control and Comparison ISO 10964 is used by manufacturers and testing laboratories to compare the effectiveness of anaerobic adhesives in threaded assemblies, ensuring products meet required bonding strength and locking capabilities.

Product Development and Specification Compliance The standard supports R&D teams in optimizing adhesive formulations and fastener combinations for specific applications, aiding in certification against mechanical performance standards.

Maintenance and Safety Assurance By understanding adhesive torque strengths, engineers can specify appropriate bonding products to prevent loosening in critical machinery, automotive components, aerospace fasteners, and industrial assemblies.

Flexible Use with Other Adhesives While targeted at anaerobic adhesives, the method may be adapted for alternative adhesive types through mutual agreement, broadening its relevance in various bonding technologies.

Related Standards

ISO 898-1:1988 Specifies mechanical properties of bolts, screws, and studs used for fastener test specimens in ISO 10964.

ISO 898-2:1992 Defines mechanical properties for nuts, ensuring standardization of test components.

ISO 291:1977 Provides standard atmospheres for conditioning plastics and adhesive test specimens, critical for consistent testing environments.

Adhesive and Threaded Fastener Standards Other ISO standards covering adhesive characterization, threaded fastener dimensions, and mechanical testing complement ISO 10964 for comprehensive bonding performance evaluation.

Keywords: ISO 10964, anaerobic adhesives, torque strength determination, threaded fasteners, adhesive bonding tests, breakaway torque, breakloose torque, prevailing torque, bolt and nut testing, adhesive locking effect, fastener testing standards, quality control adhesives.

ISO 10964:1993 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 898-1:1988

Mechanical properties of fasteners — Part 1: Bolts, screws and studs

ISO 898-2:1992

Mechanical properties of fasteners — Part 2: Nuts with specified proof load values — Coarse thread

ISO 291:1977

Plastics — Standard atmospheres for conditioning and testing

SIST EN 15865:2009

Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 mod…

ISO 8980-3:2022/Amd 1:2026

Ophthalmic optics — Uncut finished spectacle lenses — Part 3: Transmittance specifications and test methods —…

BS ISO 2910:2018

Cinematography. Screen luminance and chrominance for the projection of film motion pictures.