SIST EN 15865:2009 PDF

Name: SIST EN 15865:2009 — Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
SKU: SIST EN 15865:2009
Price: 51.9 EUR
Availability: InStock

Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)

Название (английский):

SIST EN 15865:2009

Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 12
Дата публикации:: 10 июня 2009 г.
ICS:: 83.180
Технический комитет:: IPMA - Polimer materials and products

Тип поставки:

Full version180 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:180 €

Описание (английский):

The test method described in this European Standard is used to make comparative assessments of the securing or locking effect of anaerobic adhesives used in threaded assemblies. This method may be used for other types of adhesives, if considered suitable.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

SIST EN 15865:2009 is a European standard developed by the CEN Technical Committee on Adhesives. It specifies a test method for determining the torque strength of anaerobic adhesives applied to threaded fasteners. This standard modifies the ISO 10964:1993 method and is used primarily to evaluate the securing and locking effectiveness of anaerobic adhesives in threaded assemblies. The standard is applicable for comparative assessments and may also be adapted to other adhesives suitable for similar use.

Key Topics

Scope and Purpose

Designed for assessing the locking effect of anaerobic adhesives in threaded fasteners.

Enables comparative evaluation of adhesive performance in preventing loosening due to torque.

Applicable to different types of adhesives when suitable.

Terminology and Definitions

On torque (ΤON): Maximum torque to screw a nut onto a pre-coated bolt.

Input torque (ΤIN): Torque applied to create or increase axial load.

Breakaway torque (ΤBA): Torque needed to initially break the bond during unscrewing.

Breakloose torque (ΤBL): Torque required to eliminate axial load in a preloaded assembly.

Prevailing torque (ΤP): Torque after initial bond breakage, typically measured at a 180º nut rotation.

Test Principles

The test determines torque values required to unscrew bonded bolt and nut assemblies.

Measurements include breakage of adhesive bonds and the torque necessary for continued unscrewing.

Tests performed on unseated (loose fit) and seated (preloaded) assemblies.

Test Equipment and Procedure

Uses a test machine with:

Clamping for bolt heads.
A nut-turning device at constant speed.
Accurate torque measurement tools, either with graphic recording or direct reading.

Test specimens typically include M10 x 38 bolts and nuts of property class 8.8, conforming to EN ISO fastener standards.

Adhesive application involves coating bolts and nuts with enough adhesive to cover the nut height plus two threads.

Assembly and curing are performed per adhesive manufacturer guidelines.

Testing speed commonly set between 2–10 rotations per minute, with torque values recorded precisely.

Reporting and Quality Control

Comprehensive test report requirements include:

Adhesive identification and batch details.
Specimen size, preparation, and conditioning methods.
Test conditions such as torque input, testing speed, and equipment used.
Results presenting average torque values and standard deviations.

Important for ensuring consistency and reproducibility in adhesive performance evaluation.

Applications

Quality assurance in fastening systems: Ensuring reliability of anaerobic adhesives used in automotive, aerospace, electronics, and machinery industries.

Product development and certification: Manufacturers can benchmark adhesive formulations against standardized torque strength values.

Comparative testing: Selection and validation of adhesives for locking bolts and nuts in critical mechanical assemblies.

Safety and maintenance: Preventing loosening or failure of threaded connections under operational stresses by verifying adhesive torque capacities.

Related Standards

EN ISO 10964:1993 (modified): Original international standard on torque strength testing for anaerobic adhesives, superseded by SIST EN 15865:2009.

EN ISO 898-1:2009: Mechanical properties of fasteners – bolts, screws, studs with specified property classes.

EN 20898-2: Mechanical properties of nuts with specified proof load values.

EN ISO 291: Standard atmospheres for conditioning and testing plastics, relevant for specimen environment control.

EN ISO 898-6: Mechanical properties of fine pitch thread nuts, complementing fastener property specifications.

By adhering to SIST EN 15865:2009, companies and testing laboratories can ensure robust evaluations of anaerobic adhesives’ torque strength on threaded fasteners-enhancing product safety, reliability, and performance consistency across various industrial sectors.

SIST EN 15865:2009 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Scope and Purpose

Terminology and Definitions

Test Principles

Test Equipment and Procedure

Reporting and Quality Control

Applications

Related Standards

Технические детали

EN 15865:2009

Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 mod…

ISO 10964:1993

Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners

ISO 898-1:2009

Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs wit…

BS ISO 2910:2018

Cinematography. Screen luminance and chrominance for the projection of film motion pictures.

ISO 8986-2:1995/Amd 1:2000

Plastics — Polybutene (PB) moulding and extrusion materials — Part 2: Preparation of test specimens and deter…