ISO 13216-2:2004 PDF

Name: ISO 13216-2:2004 — Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 2: Top tether anchorages and attachments
SKU: ISO 13216-2:2004
Price: 25 EUR
Availability: InStock

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 2: Top tether anchorages and attachments

Название (английский):

ISO 13216-2:2004

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 2: Top tether anchorages and attachments

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 22
Дата публикации:: 29 ноября 2004 г.
Издание:: ISO IS 13216 edition 1 version 1
ICS:: 43.040.80

Тип поставки:

Full version330 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:330 €

Описание (английский):

ISO 13216-2:2004 establishes the positioning zones, dimensions and general and static-strength requirements for top tether anchorages used together with seat bight anchorages according to ISO 13216-1 or with other systems for anchoring child restraint systems (CRS) in road vehicles. It is applicable to child restraint systems intended for children with a mass of up to 22 kg.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview - ISO 13216-2:2004 (Top tether anchorages)

ISO 13216-2:2004 specifies top tether anchorages and attachments for child restraint systems (CRS) in road vehicles. It establishes positioning zones, dimensional rules and static-strength requirements for top tether anchorages used together with seat bight anchorages (ISO 13216-1) or other lower attachment systems. The standard applies to CRS intended for children with a mass up to 22 kg and defines how vehicle anchorages must accept and transfer tether loads to the vehicle structure.

Key topics and technical requirements

Positioning zones

Defines the wider ISOFIX zone (for CRS with rigid ISOFIX bight attachments) and conventional zones (compatible with US/Canadian regulations).
Specifies geometric limits including angles and clearances (examples from the standard: maximum 45° above horizontal in side view; origin of tether on the CRS located 550 mm above the CRF horizontal face; strap path wraparound lengths of 250 mm and 200 mm).
Anchorage must be located between 200 mm and 2 000 mm measured along the strap from the tether origin on the child restraint fixture (CRF).
Notes on routing devices if anchorages are placed outside nominal zones (minimum setbacks and strength requirements).

Anchor dimensions and usability

Anchorage hardware must permit hook-type connectors and provide adequate clearance for latching and unlatching (see figure references in the standard).

Strength and testing

Static-strength testing using a Static Force Application Device (S-FAD) engaged with ISOFIX seat bight anchorages per ISO 13216-1.
Webbing properties referenced (low-elongation polyester webbing, ~7–9% elongation at 11 kN) and loads applied during tests.
Permanent deformation is acceptable in tests provided the anchorage does not break or separate from the vehicle.

Applications - who uses ISO 13216-2

Vehicle manufacturers - design and integrate compliant top tether anchorages into seats and vehicle structures.

CRS (child restraint) designers and manufacturers - ensure CRS tether connectors, straps and intended operating envelope match vehicle anchorages and ISOFIX conventions.

Testing laboratories and certification bodies - perform strength and positioning verification using S-FAD procedures.

Regulators and safety engineers - assess compatibility with national regulations and specify installation guidance for end users.

Related standards

ISO 13216-1: Seat bight anchorages and attachments

ISO 6549: H- and R-point determination for vehicle seating reference

SAE J1100: Motor vehicle dimensions

(ISO 13216 Part 3 - classification of CRS dimensions - is under preparation)

Keywords: ISO 13216-2:2004, top tether anchorages, child restraint systems, CRS, ISOFIX zones, tether strap, S-FAD, vehicle anchorages, static-strength testing.

ISO 13216-2:2004 PDF

Abstract

Похожие стандарты

Overview - ISO 13216-2:2004 (Top tether anchorages)

Key topics and technical requirements

Applications - who uses ISO 13216-2

Related standards

Технические детали

ISO 13216-1:1999/Amd 3:2006

Road vehicles — Anchorages in vehicles and attachments to anchorages for child restraint systems — Part 1: Se…

BS ISO 13216-2:2004

Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Top tether a…

ISO 6549:1980

Road vehicles — Procedure for H-point determination

BS ISO 13216-4:2020

Road vehicles. Anchorages in vehicles and attachments to anchorages for child restraint systems. Lower tether…