Overview
ISO 6589:1983 specifies a laboratory test method for assessing the air permeability of non-opening joints in the exterior walls of buildings. Developed by the International Organization for Standardization (ISO) Technical Committee ISO/TC 59 on Building Construction, this standard provides a controlled procedure for evaluating the resistance of joints to the passage of air under differential pressure conditions. It covers joints between components fixed according to manufacturers' recommendations and addresses joints both with and without prior ageing treatment.
The standard is essential for ensuring building envelope airtightness, improving thermal efficiency, and minimizing energy loss due to air infiltration. It does not apply to joints within components (e.g., glass fixed in a window frame sealed with glazing compound) but focuses on the joints between components in the external wall structure.
Key Topics
-
Scope and Application
ISO 6589:1983 applies to exterior wall joints between building components, crucial for air infiltration control. It excludes joints inside components but includes joints between glass and fixed window frames on site.
-
Test Methodology
The test simulates real-world conditions by subjecting the joint specimen to both positive and negative differential pressures within a sealed, pressurizable chamber. Pressures range typically from 50 Pa up to 600 Pa, or higher if required, applied in controlled increments.
-
Test Setup and Apparatus
The essential equipment includes:
- A sealed chamber large enough to house at least 1 meter of joint length.
- Devices to impose and control differential pressure across the joint.
- Airflow metering equipment to measure air leakage.
- Instruments for measuring differential pressure and rapid pressure changes.
-
Preparation and Installation
The joint must be installed between actual components representing realistic conditions and able to sustain the imposed pressures without deformation that might affect performance. Both nominal and tolerance variations in joint width and alignment are tested.
-
Measurement and Reporting
Air permeability is expressed in cubic metres per hour per metre of joint length and plotted against differential pressure. Test reports must include detailed descriptions of the apparatus, test conditions, specimen, simulated ageing performed (if any), and the resulting air permeability data.
Applications
-
Building Envelope Design
Ensuring effective sealing of joints in exterior walls to improve overall airtightness contributes to energy efficiency, indoor comfort, and building durability.
-
Quality Control and Assurance
Manufacturers and building professionals use the standard to verify the performance of joint systems before installation, ensuring compliance with energy codes and performance requirements.
-
Material and Joint System Development
The air permeability test supports research and development of joint materials and sealants, particularly their resistance to air leakage after ageing or environmental exposure.
-
Assessment of Building Retrofit Solutions
When upgrading building envelopes, testing existing or new joint solutions in the lab supports selecting effective retrofit materials that maintain airtightness.
Related Standards
-
ISO 2444: Joints in Building - Vocabulary
Provides key definitions related to building joints that support understanding and consistency in testing standards.
-
ISO 3447: Joints in Building - General Check-list of Joint Functions
Outlines the functional requirements that joints must satisfy, providing a basis for testing the key aspects such as air permeability.
-
ISO 6613: Windows and Door Height Windows - Air Permeability Test
Addresses air permeability testing for windows and doors, complementing ISO 6589’s focus on building joints outside of components.
Keywords: ISO 6589, air permeability test, building joints, exterior walls, laboratory test method, airtightness, differential pressure, joint air leakage, building envelope, construction standards, energy efficiency, joint performance testing, simulated ageing, exterior wall components.