ISO 6682:1986 PDF

Overview

ISO 6682:1986 - "Earth-moving machinery - Zones of comfort and reach for controls" is an ISO guidance standard that defines ergonomic zones of comfort and zones of reach for hand and foot controls in seated operator positions. Derived from overlapping reach capabilities of large and small operators, the standard provides coordinate-based control location zones referenced to the Seat Index Point (SIP). It replaces the 1980 edition with a minor revision and is intended as a design guide for operator compartments in earth‑moving machinery.

Key topics and technical requirements

• Zones defined from SIP: Uses an XYZ coordinate system with origin at the SIP (X fore‑aft, Y lateral, Z vertical) to locate control zones.
• Zones of comfort vs. reach:
  • Zones of comfort - preferred locations for primary controls (frequently used, e.g., transmission, steering, brakes, working-tool controls).
  • Zones of reach - acceptable locations for secondary controls (infrequently used functions like lights, wipers, heater).
• Anthropometric basis: Zones are derived from overlapping reach envelopes of large and small operators using the human dimensions given in ISO 3411.
• Coordinate and geometry data: Annex B supplies the X, Y, Z coordinates and radii that define planar, cylindrical and spherical boundaries for the control zones (for drafting and CAD use).
• Design allowances and exceptions:
  • Hand control comfort zone may be rotated up to 30° about a vertical axis when operator turns in seat.
  • Zones for finger‑grasp controls may be increased by 75 mm.
  • Foot control zones can be narrowed by 25 mm fore and aft under certain conditions.
  • Annex A lists seat adjustment assumptions (e.g., 150 mm fore‑aft adjustment; small operator forward, large operator rearward).
• Terminology and references: Defines primary/secondary controls, control displacement and movement terms (flexion, adduction, abduction, circumduction).

Applications and users

ISO 6682:1986 is practical for:

• Cab and cockpit designers for excavators, loaders, bulldozers and other earth‑moving machines
• Ergonomists and human factors engineers optimizing operator reach and comfort
• OEMs and component suppliers placing joysticks, pedals, levers and switches
• Safety engineers and fleet managers aiming to reduce operator fatigue and improve productivity
• Standards compliance teams referencing standardized control placement for procurement or certification

Using ISO 6682 helps improve operator comfort, reduce fatigue and enhance control accessibility - important for safety, productivity and ergonomic regulatory compliance.

Related standards

• ISO 3411 - Earth‑moving machinery: human physical dimensions and operator envelope
• ISO 5353 - Seat index point (SIP) definition
• ISO 6746‑1 - Definitions of dimensions and symbols (base machine)