ISO 8031:2020 PDF

Overview

ISO 8031:2020 - Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity - defines standardized electrical test methods for rubber and plastic hoses, tubing and hose assemblies. The standard covers measurement procedures for conductive, antistatic and non‑conductive hoses and for checking electrical continuity or discontinuity between metal end fittings. It applies both to laboratory and practical field/production verification, and the hose test methods for rubber are explicitly applicable to plastics hoses.

Key topics and technical requirements

• Types of hose construction: test procedures for hoses with a conducting lining, conducting cover, or conducting compounds throughout the wall.
• Test instruments: preference for insulation-resistance instruments (nominal open-circuit voltage ~500 V d.c.) for resistance checks; ohmmeters for continuity; and a simple 4.5 V battery + lamp arrangement for rapid field continuity checks where permitted.
• Accuracy and power limits: specified measurement accuracy (typically ±10 % for resistance measurements unless otherwise stated) and a requirement that no more than 3 W be dissipated in the specimen during testing to avoid heating errors.
• Through-wall resistance: a dedicated method for measuring resistance through the hose wall (important for hoses used in explosive atmospheres) at specified voltage and accuracy.
• Electrodes and contacts: prescribed electrode forms (25 mm bands around circumference), acceptable conductive media (silver lacquer, colloidal graphite or a defined conductive liquid), and recommended contact techniques for reliable measurement.
• Preparation and conditioning: surface cleaning (avoid organic solvents that swell rubber), specimen conditioning and clear procedural steps for laboratory and field tests.
• Reporting: required test report details to support conformity assessment and product acceptance.

Applications and practical value

• Ensures hoses intended to be antistatic or conductive meet functional safety and regulatory requirements (for example, to prevent static build-up in fuel-transfer, chemical or explosive‑atmosphere applications).
• Useful for manufacturers (production quality control and acceptance tests), test laboratories (repeatable, accredited measurements), and end users/maintenance teams (field verification of continuity between metal end fittings).
• Enables specification writers and procurement teams to reference a harmonized test method when defining electrical performance in product standards and safety documentation.

Who should use this standard

• Hose and hose-assembly manufacturers, product designers, QA/QC engineers, test labs, safety & compliance officers in petrochemical, pharmaceutical, food processing, and other industries where static control is critical.

Related standards

• ISO 2878 - Antistatic and conductive rubber products - Determination of electrical resistance
• ISO 8330 - Rubber and plastics hoses and hose assemblies - Vocabulary

Keywords: ISO 8031:2020, electrical resistance, electrical conductivity, rubber hoses, plastics hoses, hose assemblies, antistatic, conductive, test methods, electrical continuity, through-wall resistance.