ISO 8220:1986 PDF

Name: ISO 8220:1986 — Aluminium oxide primarily used for the production of aluminium — Determination of the fine particle size distribution (less than 60 mu/m) — Method using electroformed sieves
SKU: ISO 8220:1986
Price: 25 EUR
Availability: InStock

Aluminium oxide primarily used for the production of aluminium — Determination of the fine particle size distribution (less than 60 mu/m) — Method using electroformed sieves

Название (английский):

ISO 8220:1986

Aluminium oxide primarily used for the production of aluminium — Determination of the fine particle size distribution (less than 60 mu/m) — Method using electroformed sieves

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 18 сентября 1986 г.
Издание:: ISO IS 8220 edition 1 version 1
ICS:: 71.100.10

Тип поставки:

Full version45 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

The particles in the range of 63 to 16 m are quantitatively separated by sieving in an aqueous solution of a dispersing agent. The sieves are square-aperture or round-aperture electroformed sieves, depending on their origin. Each sieved fraction is dried and weighed.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 8220:1986 specifies a laboratory method for determining the fine particle size distribution (less than 60 µm) of aluminium oxide (alumina) primarily used for aluminium production. The method quantitatively separates particles in the 63–16 µm range by wet sieving using electroformed sieves (square- or round-aperture), followed by drying and high-precision weighing of each fraction. This standard supports consistent particle-size reporting for quality control, supplier–purchaser agreements and process control in alumina production.

Key topics and technical requirements

Scope: determination of alumina particle-size distribution below 60 µm, focusing on sieve apertures 63, 45, 32 and 16 µm.

Sieves: electroformed sieves (square- or round-aperture). Note: results from square- and round-aperture sieves are not directly correlated - sieve type must be recorded.

Apparatus and conditions:

Agitation device for slow oscillation of sieves (typical operation ~1 Hz, 10 mm amplitude).
Electroformed sieves mounted on stainless-steel frames (max. dimensions 75 mm; available Ø 65 mm).
Ultrasonic cleaner (max power 100 W) for sieve cleaning.
Electric oven controlled at 110 ± 2 °C for drying; weighing to 0.0001 g precision.
Vacuum device, polyethylene funnel, glass crystallization vessels (≈125 mm × 65 mm), adjustable supports, desiccator.

Reagents:

Sodium hexametaphosphate dispersant, 1 g/L.
Non‑ionic polyethoxyl surface-active agent (saturated solution) for wetting.
Use distilled or equivalent purity water and analytical-grade reagents.

Test portion masses (per ISO 802 sampling guidance):

2 g for 63 µm and 45 µm sieves
1 g for 32 µm sieve
0.4 g for 16 µm sieve

Procedure highlights:

Wet sieving in dispersant solution with repeated solution changes and agitation until no further material passes each sieve.
Dry sieves + residues and determine mass differences to express each fraction as a percentage by mass.
Sieve cleaning: brush, ultrasonic cleaning (≈2 min), rinse and oven-dry; inspect electroformed membrane microscopically.

Applications and users

Quality control and acceptance testing for alumina producers, suppliers and purchasers.

Process control in aluminium smelters and refining operations where particle size affects calcination, reactivity, sintering or feedstock performance.

Materials testing and research laboratories performing granulometry of fine alumina powders.

Contract specification and verification between manufacturers and end-users for product consistency.

Related standards

ISO 862 - Preparation and storage of alumina test samples

ISO 803 - Determination of loss on ignition / moisture at 300 °C

ISO 3310-2 - Test sieves: technical requirements

ISO 802 - Sampling guidance for aluminium oxide

Use keywords naturally: ISO 8220:1986, aluminium oxide, alumina, fine particle size distribution, electroformed sieves, particle size analysis, wet sieving, granulometry, quality control.

ISO 8220:1986 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and users

Related standards

Технические детали

SIST EN ISO 8028:2024

Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)

ISO 8626:1989/Amd 1:2016

Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amendment 1

BS EN ISO 8032:1999

Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)

SIST ISO 3310-2:2015

Test sieves - Technical requirements and testing - Part 2: Test sieves of perforated metal plate