Поиск

Ambient air. Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chro…

Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. Dimethylether (DME). Measurement and…

Application of statistical and related methods to new technology and product development process. Robust tole…

Windows, doors and curtain walling. Impacted by windborne debris in windstorms. Test method and classificatio…

Textiles. Dyestuffs. General principles of testing coloured textiles for dyestuff identification.

Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic j…

Ships and marine technology. Heading control systems for high-speed craft.

Textiles. Determination of spirality after laundering. Woven and knitted fabrics.

Automation systems and integration. Interoperability of capability units for manufacturing application soluti…

Plastics. Polyamide (PA) moulding and extrusion materials. Designation system and basis for specifications.

Ships and marine technology. Marine environment protection. Arrangement and management of port waste receptio…

Water quality. Determination of toxicity of fresh water sediments using Hyalella azteca.

Corrosion of metals and alloys. Guidelines for galvanic corrosion control

1 Scope This document specifies standard methods for avoiding galvanic corrosion in the design stage and for determining whether actual corrosion damage was caused by galvanic corrosion. It also spec…

Corrosion of metals and alloys — Guidelines for galvanic corrosion control

Overview ISO 16364:2026, Corrosion of metals and alloys - Guidelines for galvanic corrosion control, is an international standard published by ISO. It provides authoritative methods and guidelines fo…

Eye and face protection for occupational use — Part 3: Additional requirements for mesh protectors — Amendmen…

Overview ISO 16321-3:2021/Amd 1:2025 is an amendment to the international standard focusing on eye and face protection for occupational use, specifically addressing additional requirements for mesh p…

Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performa…

Overview ISO 16358-1:2013/Amd 1:2019 is an amendment to ISO 16358-1 - the international method for testing and calculating cooling seasonal performance factors (CSPF) of air‑cooled air conditioners a…

Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — P…

Overview ISO 16331-1:2017 - "Optics and optical instruments - Laboratory procedures for testing surveying and construction instruments - Part 1: Performance of handheld laser distance meters" - speci…

Road vehicles — Blended fuels refuelling connector — Amendment 1

Overview ISO 16380:2014/Amd 1:2016 is an important amendment to the international standard ISO 16380:2014, which specifies the requirements for refuelling connectors used with blended gaseous fuels i…

Geotechnical investigation and testing - Laboratory testing of rock - Part 1: Determination of water content…

Overview EN ISO 16383-1:2025 - "Geotechnical investigation and testing - Laboratory testing of rock - Part 1: Determination of water content" specifies the laboratory oven‑drying method for determini…

Geotechnical investigation and testing - Laboratory testing of rock - Part 1: Determination of water content…

Overview EN ISO 16383-1:2025 - "Geotechnical investigation and testing - Laboratory testing of rock - Part 1: Determination of water content" specifies the laboratory oven‑drying method for determini…

Eye and face protection for occupational use - Part 1: General requirements - Amendment 1 (ISO 16321-1:2021/A…

Overview EN ISO 16321-1:2022/A1:2025 is the CEN-endorsed amendment to ISO 16321-1 (Part 1: General requirements) for eye and face protection for occupational use. Approved by CEN (17 July 2024) and p…

Eye and face protection for occupational use - Part 1: General requirements - Amendment 1 (ISO 16321-1:2021/A…

Overview EN ISO 16321-1:2022/A1:2025 is the CEN-endorsed amendment to ISO 16321-1 (Part 1: General requirements) for eye and face protection for occupational use. Approved by CEN (17 July 2024) and p…

Soil quality - Effects of contaminants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on repro…

Overview EN ISO 16387:2023 - "Soil quality - Effects of contaminants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction" - is an international/CEN standard for assessing th…

Soil quality - Effects of contaminants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on repro…

Overview EN ISO 16387:2023 - "Soil quality - Effects of contaminants on Enchytraeidae (Enchytraeus sp.) - Determination of effects on reproduction" - is an international/CEN standard for assessing th…

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifi…

Overview EN ISO 16396-1:2022 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 16396-1:2022) is a CEN-adopted international s…

Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifi…

Overview EN ISO 16396-1:2022 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 16396-1:2022) is a CEN-adopted international s…

Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2021)

Overview - EN ISO 16321-1:2022 (Eye and face protection, Part 1) EN ISO 16321-1:2022 (ISO 16321-1:2021) is the CEN-adopted European standard that sets general requirements for occupational eye and fa…

Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determ…

Overview EN ISO 16396-2:2022 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - specifies standardized procedures f…

Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determ…

Overview EN ISO 16396-2:2022 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - specifies standardized procedures f…

Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321…

Overview EN ISO 16321-3:2022 (ISO 16321-3:2021) is the CEN-adopted international standard that defines additional performance and marking requirements for mesh protectors used for eye and face protec…

Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321…

Overview EN ISO 16321-3:2022 (ISO 16321-3:2021) is the CEN-adopted international standard that defines additional performance and marking requirements for mesh protectors used for eye and face protec…

Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2021)

Overview - EN ISO 16321-1:2022 (Eye and face protection, Part 1) EN ISO 16321-1:2022 (ISO 16321-1:2021) is the CEN-adopted European standard that sets general requirements for occupational eye and fa…

Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during wel…

Overview EN ISO 16321-2:2021 - Eye and face protection for occupational use, Part 2 - specifies additional material, design, performance and marking requirements for protectors used during welding an…

Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during wel…

Overview EN ISO 16321-2:2021 - Eye and face protection for occupational use, Part 2 - specifies additional material, design, performance and marking requirements for protectors used during welding an…

Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd 1:2016)

Overview SIST EN ISO 16380:2018 - Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd 1:2016) specifies safety, construction and performance requirements for vehicle com…

Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd 1:2016)

Overview EN ISO 16380:2018 - Road vehicles - Blended fuels refuelling connector (ISO 16380:2014, including Amd 1:2016) specifies safety, construction and performance requirements for vehicle compress…

Water quality - Determination of glyphosate and AMPA - Method using high performance liquid chromatography (H…

Overview - SIST ISO 16308:2018 (Water quality - Glyphosate and AMPA by HPLC–MS/MS) SIST ISO 16308:2018 specifies a validated analytical method for the determination of dissolved glyphosate and its ma…

Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: Gene…

Overview EN ISO 16371-2:2017 - "Non‑destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2" defines the general principles and minimum practice for perfor…

Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: Gene…

Overview EN ISO 16371-2:2017 - "Non‑destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2" defines the general principles and minimum practice for perfor…

Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for dyestuff identification (I…

Overview EN ISO 16373-1:2015 - Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for dyestuff identification - is a CEN-adopted ISO standard that defines dye and pigment…

Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for dyestuff identification (I…

Overview EN ISO 16373-1:2015 - Textiles - Dyestuffs - Part 1: General principles of testing coloured textiles for dyestuff identification - is a CEN-adopted ISO standard that defines dye and pigment…

Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allerg…

Overview EN ISO 16373-2:2014 (ISO 16373-2:2014) specifies a general laboratory method for detecting and quantifying extractable dyestuffs from textiles - including allergenic and carcinogenic dyestuf…

Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triet…

Overview EN ISO 16373-3:2014 - "Textiles - Dyestuffs - Part 3" specifies a laboratory method for the detection and quantitative determination of certain carcinogenic dyestuffs in dyed, printed or coa…

Textiles - Dyestuffs - Part 2: General method for the determination of extractable dyestuffs including allerg…

Overview EN ISO 16373-2:2014 (ISO 16373-2:2014) specifies a general laboratory method for detecting and quantifying extractable dyestuffs from textiles - including allergenic and carcinogenic dyestuf…

Textiles - Dyestuffs - Part 3: Method for determination of certain carcinogenic dyestuffs (method using triet…

Overview EN ISO 16373-3:2014 - "Textiles - Dyestuffs - Part 3" specifies a laboratory method for the detection and quantitative determination of certain carcinogenic dyestuffs in dyed, printed or coa…

Water quality - Determination of toxicity of fresh water sediments using Hyalella azteca

Overview ISO 16303:2013 defines a standardized laboratory method for assessing the toxicity of freshwater sediments using the amphipod Hyalella azteca. The protocol is a 14-day and/or 28-day survival…

Ambient air - Determination of particle-phase polycyclic aromatic hydrocarbons by high performance liquid chr…

Overview ISO 16362:2005 - Ambient air: Determination of particle‑phase polycyclic aromatic hydrocarbons (PAHs) by high performance liquid chromatography (HPLC) - specifies validated sampling, cleanup…

Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)

Overview EN ISO 16330:2003 - Reciprocating positive displacement pumps and pump units - defines technical requirements (excluding safety and testing) for reciprocating positive displacement pumps and…

Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003)

Overview EN ISO 16348:2003 - "Metallic and other inorganic coatings - Definitions and conventions concerning appearance" defines appearance-related terminology and sets out the principles for validat…

Metallic and other inorganic coatings - Definitions and conventions concerning appearance (ISO 16348:2003)

Overview EN ISO 16348:2003 - "Metallic and other inorganic coatings - Definitions and conventions concerning appearance" defines appearance-related terminology and sets out the principles for validat…

Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)

Overview EN ISO 16330:2003 - Reciprocating positive displacement pumps and pump units - defines technical requirements (excluding safety and testing) for reciprocating positive displacement pumps and…

Ships and marine technology — Marine environment protection — Arrangement and management of port waste recept…

Welding for aerospace applications — Resistance spot and seam welding

Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — P…

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fir…

Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig

Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fir…

Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method

Soil quality — Effects of pollutants on Enchytraeidae (Enchytraeus sp.) — Determination of effects on reprodu…

Mobile elevating work platforms — Design calculations, safety requirements and test methods