Поиск

Road vehicles. Automotive cables. Dimensions and requirements for unscreened twisted pair RF cables with a sp…

Organization and digitization of information about buildings and civil engineering works, including building…

Fibre ropes and cordage. Vocabulary.

Aerospace series. Tube fittings for fluid systems, 5 080 psi (35 000 kPa). Qualification specification.

Intelligent transport systems. Road boundary departure prevention systems (RBDPS). Performance requirements a…

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antialgal activity of semicon…

Surface active agents. Determination of free propylene oxide content in propylene oxide adduct surfactants. G…

Sludge recovery, recycling, treatment and disposal — Laboratory chemical conditioning procedure

1 Scope This method gives a standardized procedure for the conditioning operation when selecting a conditioning product at laboratory scale and also for the production of flocculated thickened sludge…

Sludge recovery, recycling, treatment and disposal. Protocol for validating methods for physical properties o…

1 Scope This document specifies procedures for validating the characterization methods for physical properties of sludge. The method applies to sludges and suspensions from: storm water handling; urb…

Furniture — Tables — Test methods for the determination of stability, strength and durability

Overview ISO 19682:2023 - Furniture - Tables - Test methods for the determination of stability, strength and durability defines standardized test methods to evaluate the structural performance of all…

Aerospace series — Fitting end, 24° internal cone, external thread, flareless type extra fine thread pitch in…

Overview ISO 19632:2015 is an ISO aerospace design standard that specifies the configuration, dimensions, tolerances and required characteristics of a flareless fitting end with a 24° internal cone a…

Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 4: Design p…

Overview EN ISO 19659-4:2026 - Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 4: Design parameters, and test and inspection items for the HVAC unit…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (…

Overview SIST EN ISO 19634:2026 is the European standard that specifies the notations and symbols used to represent physical, mechanical, and thermal characteristics for ceramic matrix composites (CM…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Ceramic composites - Notations and symbols (…

Overview EN ISO 19634:2026 is the European standard that specifies the notations and symbols used to represent physical, mechanical, and thermal characteristics for ceramic matrix composites (CMCs).…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determi…

Overview EN ISO 19630:2025 (CEN adoption of ISO 19630:2025) specifies a harmonized test method for determining the tensile properties of single ceramic filaments at ambient temperature. The standard…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods of test for reinforcements - Determi…

Overview EN ISO 19630:2025 (CEN adoption of ISO 19630:2025) specifies a harmonized test method for determining the tensile properties of single ceramic filaments at ambient temperature. The standard…

Stationary source emissions - Determination of greenhouse gas emissions in energy-intensive industries - Part…

Overview ISO 19694-7:2024 - "Stationary source emissions - Determination of greenhouse gas emissions in energy‑intensive industries - Part 7: Semiconductor and display industries" provides a standard…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-6:2025 - part of the ISO 19650 series on information management using Building Information Modelling (BIM) - specifies concepts and principles for the classification, sharing an…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-6:2025 - part of the ISO 19650 series on information management using Building Information Modelling (BIM) - specifies concepts and principles for the classification, sharing an…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composi…

Overview SIST EN ISO 19628:2025 sets out standardized methods for determining the specific heat capacity of advanced ceramic composites, specifically those with continuous reinforcement structures. T…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composi…

Overview EN ISO 19628:2024 (ISO 19628:2024) specifies standardized procedures for measuring the specific heat capacity of advanced ceramic matrix composites (fine ceramics) reinforced continuously in…

Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing…

Overview EN ISO 19675:2024 (identical to ISO 19675:2017 and adopted by CEN) defines the specification for a steel calibration block used to calibrate phased array ultrasonic testing (PAUT) equipment.…

Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing…

Overview EN ISO 19675:2024 (identical to ISO 19675:2017 and adopted by CEN) defines the specification for a steel calibration block used to calibrate phased array ultrasonic testing (PAUT) equipment.…

Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms an…

Overview EN ISO 19659-1:2023 (adoption of ISO 19659-1:2017) is a CEN-endorsed European standard that defines the terms, definitions, symbols and abbreviated terms used throughout the ISO 19659 series…

Railway applications - Heating, ventilation and air conditioning systems for rolling stock - Part 1: Terms an…

Overview EN ISO 19659-1:2023 (adoption of ISO 19659-1:2017) is a CEN-endorsed European standard that defines the terms, definitions, symbols and abbreviated terms used throughout the ISO 19659 series…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-4:2022 is part of the ISO 19650 series on the organization and digitization of information about buildings and civil engineering works, including building information modelling…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-4:2022 is part of the ISO 19650 series on the organization and digitization of information about buildings and civil engineering works, including building information modelling…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composi…

Overview SIST EN ISO 19629:2022 defines a standardized flash method for determining the unidimensional thermal diffusivity of fine ceramics, specifically ceramic matrix composites (CMCs) with continu…

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composi…

Overview EN ISO 19629:2022 (identical to ISO 19629:2018) specifies the flash method for determination of unidimensional thermal diffusivity of ceramic matrix composites with continuous fibre reinforc…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview SIST EN ISO 19650-3:2020 is a European and International Standard developed by CEN and ISO, specifying requirements for the management and organization of asset information during the operat…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-5:2020 (ISO 19650-5:2020) defines a security-minded approach to information management for building information modelling (BIM) and related digital information in the built envi…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-3:2020 is a European and International Standard developed by CEN and ISO, specifying requirements for the management and organization of asset information during the operational…

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment i…

Overview EN ISO 19679:2020 specifies a laboratory test method for measuring the aerobic biodegradation of non‑floating plastic materials settled at a seawater/sediment interface (marine sandy sedimen…

Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment i…

Overview EN ISO 19679:2020 specifies a laboratory test method for measuring the aerobic biodegradation of non‑floating plastic materials settled at a seawater/sediment interface (marine sandy sedimen…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-5:2020 (ISO 19650-5:2020) defines a security-minded approach to information management for building information modelling (BIM) and related digital information in the built envi…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-2:2018 defines requirements for information management during the delivery phase of assets using Building Information Modelling (BIM). Adopted by CEN, this part of the ISO 19650…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-1:2018 (ISO 19650-1:2018) defines the concepts and principles for information management using Building Information Modelling (BIM). Published by CEN as part of the ISO 19650 se…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-1:2018 (ISO 19650-1:2018) defines the concepts and principles for information management using Building Information Modelling (BIM). Published by CEN as part of the ISO 19650 se…

Organization and digitization of information about buildings and civil engineering works, including building…

Overview EN ISO 19650-2:2018 defines requirements for information management during the delivery phase of assets using Building Information Modelling (BIM). Adopted by CEN, this part of the ISO 19650…

Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO/FDIS 1969:2004)

Overview EN ISO 1969:2004 - Fibre ropes: Polyethylene - 3- and 4-strand ropes specifies requirements for polyethylene fibre ropes manufactured as 3-strand hawser-laid (type A) and 4-strand shroud-lai…

Fibre ropes and cordage - Vocabulary (ISO 1968:2004)

Fibre ropes - Polyethylene - 3- and 4-strand ropes (ISO 1969:2004)

Overview EN ISO 1969:2004 - Fibre ropes: Polyethylene - 3- and 4-strand ropes specifies requirements for polyethylene fibre ropes manufactured as 3-strand hawser-laid (type A) and 4-strand shroud-lai…

Fibre ropes and cordage - Vocabulary (ISO 1968:2004)

Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978)

Overview SIST EN ISO 196:1998 establishes a standardized method for detecting residual (internal) stresses in wrought copper and copper alloy products using the Mercury(I) nitrate test. Residual stre…

Wrought copper and copper alloys - Detection of residual stress - Mercury(I) nitrate test (ISO 196:1978)

Overview EN ISO 196:1995 establishes a standardized method for detecting residual (internal) stresses in wrought copper and copper alloy products using the Mercury(I) nitrate test. Residual stresses…

Guidance on how to implement EN ISO 19650-series in Europe, in particular parts 1, 2, 3, 4 and 5.

Overview SIST-TS CEN/TS 18113:2025 provides comprehensive guidance for the implementation of the EN ISO 19650 series in Europe, focusing on parts 1, 2, 3, 4, and 5. Developed by SIST in collaboration…

Guidance on how to implement EN ISO 19650-series in Europe, in particular parts 1, 2, 3, 4 and 5.

Overview CEN/TS 18113:2024 - "Guidance on how to implement EN ISO 19650‑series in Europe" - is a European Technical Specification that explains how to apply the EN ISO 19650 series (parts 1–5) across…

Framework and Implementation of Common Data Environment Solutions, in accordance with EN ISO 19650

Overview CEN/TR 18093:2024 provides a practical framework for the Common Data Environment (CDE) and its implementation in accordance with EN ISO 19650. The technical report explains CDE concepts, wor…

Framework and Implementation of Common Data Environment solutions and workflow, in accordance with EN ISO 196…

Overview CEN/TR 18093:2024 provides a practical framework for the Common Data Environment (CDE) and its implementation in accordance with EN ISO 19650. The technical report explains CDE concepts, wor…

Guideline for the implementation of BIM Execution Plans (BEP) and Exchange Information Requirements (EIR) on…

Overview CEN/TR 17654:2021 is a European technical report that provides a practical guideline for implementing Exchange Information Requirements (EIR) and BIM Execution Plans (BEP) in line with EN IS…

Guideline for the implementation of Exchange Information Requirements (EIR) and BIM Execution Plans (BEP) on…

Overview CEN/TR 17654:2021 is a European technical report that provides a practical guideline for implementing Exchange Information Requirements (EIR) and BIM Execution Plans (BEP) in line with EN IS…

Guidance on how to implement EN ISO 19650-1 and -2 in Europe

Overview CEN/TR 17439:2020 - "Guidance on how to implement EN ISO 19650‑1 and ‑2 in Europe" is a CEN technical report that explains how to apply the EN ISO 19650 series for information management usi…

Guidance on how to implement EN ISO 19650-1 and -2 in Europe

Overview CEN/TR 17439:2020 - "Guidance on how to implement EN ISO 19650‑1 and ‑2 in Europe" is a CEN technical report that explains how to apply the EN ISO 19650 series for information management usi…

Ropes — Polyethylene — Specification

Shipbuilding — Indication of details on the general arrangement plans of ships

Ropes and cordage — Vocabulary

Withdrawal of ISO 1963-1973

Disc springs — Part 2: Technical specifications — Amendment 1: Durability chart for not shot peened springs (…

Overview ISO 19690-2:2018/Amd 1:2025 is an important amendment to the international standard governing disc springs, specifically addressing the technical specifications related to their durability.…

Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determi…

1 Scope This document specifies a method for the determination of the internal stress in thin ceramic coatings by application of the Stoney formula to the results obtained from measurement of the rad…

Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for reinforcements. Determina…

1 Scope This document specifies the conditions for the determination of tensile properties of single filaments of ceramic fibre such as tensile strength , Young modulus and fracture strain . The meth…