SIST EN 1899-2:2000 PDF

Name: SIST EN 1899-2:2000 — Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples (ISO 5815:1989, modified)
SKU: SIST EN 1899-2:2000
Price: 65.56 EUR
Availability: InStock

Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples (ISO 5815:1989, modified)

Название (английский):

SIST EN 1899-2:2000

Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples (ISO 5815:1989, modified)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 20
Дата публикации:: 1 января 2000 г.
ICS:: 13.060.50
Технический комитет:: KAV - Water quality

Тип поставки:

Full version300 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:4 раб. дн. (перевод)

Цена:300 €

Описание (английский):

This European Standard specifies determination of the biochemical oxygen demand of waters of undiluted samples. This standard is applicable to all waters having biochemical oxygen demands greater than or equal to the limit of determination 0,5 mg/l of oxygen and not exceeding 6 mg/l of oxygen.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

EN 1899-2:1998 - Water quality: Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted samples (ISO 5815:1989, modified) specifies a laboratory procedure for measuring biochemical oxygen demand (BOD) in undiluted water samples. The method is intended for waters with BOD values ≥ 0.5 mg/L and ≤ 6 mg/L of oxygen. It adapts the ISO 5815 dilution/seeding approach for low‑BOD, undiluted matrices and defines sample handling, reagents, incubation and quality checks required for reliable BODn results.

Key topics and technical requirements

Scope and limits: Applicable to undiluted waters with BOD in the 0.5–6 mg/L range.

Sample handling: Store samples at 0–4 °C in filled, sealed bottles and begin analysis as soon as possible, preferably within 24 hours of collection.

Incubation conditions: Incubate completely filled, stoppered bottles in the dark at 20 ± 1 °C for the defined period (standard is 5 days, with guidance on alternative periods/temperatures).

Dissolved oxygen (DO) measurements: Measure DO before and after incubation using the iodometric (Winkler) method or an electrochemical probe (ISO 5813 / ISO 5814).

Seeding and blanks: Use seeded dilution water if the sample lacks adapted micro‑organisms; seed volumes typically range (example guidance) and blank runs on seeded dilution water are required to correct results.

Nitrification control: Option to suppress nitrification (e.g., allylthiourea addition) where necessary and document suppression in reports.

Quality control: Carry out a check test with a glucose–glutamic acid standard; typical recovery range for the check is about 180–230 mg/L (method check).

Reporting: Test report must reference the standard, sampling/storage details, seeding type, incubation period, suppression of nitrification (if used) and final BODn result.

Applications and who uses it

Environmental and water quality laboratories performing low‑level BOD measurements.

Regulatory bodies and consultants monitoring river water, drinking‑source impacts, or low‑strength effluents.

Wastewater treatment operators and process engineers needing precise BOD data for process control where undiluted sample measurement is preferred.

Research groups studying organic loading in low‑pollution waters.

Related standards

ISO 5815 (basis for BOD methods and seeding/dilution approach)

ISO 5813 (iodometric DO determination)

ISO 5814 (electrochemical DO probe method)

This part of EN 1899 provides a practical, standardized approach to determine low‑level biochemical oxygen demand in undiluted waters - essential for compliance monitoring, process control and environmental assessment where sensitive BODn measurement is required.

SIST EN 1899-2:2000 PDF

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Технические детали

EN 1899-2:1998

Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 2: Method for undiluted…

ISO 5815:1989

Water quality — Determination of biochemical oxygen demand after 5 days (BOD 5) — Dilution and seeding method

SIST EN ISO 5815-1:2019

Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding…

SIST EN 25813:1996

Water quality - Determination of dissolved oxygen - Iodometric method (ISO 5813:1983)

SIST EN ISO 5814:2013

Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012)