SIST EN ISO 17375:2006 PDF
Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006)
Animal feeding stuffs - Determination of aflatoxin B1 (ISO 17375:2006)
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 17
- Дата публикации:
- 1 сентября 2006 г.
- ICS:
- 65.120
- Технический комитет:
- KŽP - Agricultural food products
ISO 17375:2006 specifies a method for the determination of aflatoxin B1 in animal feeding stuffs using high-performance liquid chromatography with post-column derivatization. It is applicable to animal feeding stuffs with a fat content of up to 50 %. The limit of quantification of this method has been demonstrated to be better than 0,5 g/kg for aflatoxin B1 for a signal-to-noise ratio of 6.
Abstract
Overview
EN ISO 17375:2006 (ISO 17375:2006) specifies a validated analytical method for the determination of aflatoxin B1 in animal feeding stuffs. The method uses reverse‑phase high‑performance liquid chromatography (RP‑HPLC) with post‑column derivatization (PCD) (bromination) and fluorescence detection. It is applicable to feed matrices with up to 50% fat and demonstrates a limit of quantification (LOQ) better than 0.5 µg/kg (S/N = 6).
Key topics and technical requirements
- Sampling and scope: Designed for animal feeding stuffs (feed and compound feeds) up to 50% fat content.
- Extraction: Test portion extracted with an acetone/water (85 + 15 v/v) solvent.
- Clean‑up: Immunoaffinity columns (IACs) specific to aflatoxin B1 are used for selective cleanup. IACs must have a capacity ≥ 40 ng and provide ≥ 80% recovery for a 0.25 ng spike.
- Chromatography and detection:
- RP‑HPLC separation followed by post‑column derivatization (PCD) by bromination.
- PCD can be achieved by electrochemical bromine generation or by using pyridinium hydrobromide perbromide (PBPB).
- Final detection by fluorescence.
- Reagents and mobile phases: Specifies HPLC‑grade solvents (acetonitrile, methanol, water), mobile phase recipes (options for PBPB or electrochemical bromination), and reagents such as PBPB, potassium bromide, and nitric acid when applicable.
- Calibration: Detailed procedures for preparing aflatoxin B1 stock and calibration solutions (toluene/acetonitrile stock; Options A & B for working standards) and spectrophotometric concentration verification.
- Quality and safety: Guidance on storage, light protection of aflatoxin standards, and warnings about toxic/flammable solvents and carcinogenic nature of aflatoxins.
- Performance characteristics: The standard includes sections on precision (interlaboratory testing, repeatability, reproducibility) and reporting requirements.
Applications and users
- Routine and regulatory testing of feed ingredients and compound feeds for aflatoxin B1 contamination.
- Used by: feed testing laboratories, contract analytical labs, feed manufacturers, food safety authorities, and researchers monitoring mycotoxin exposure in livestock.
- Supports compliance with feed safety regulations and risk‑based monitoring programs.
Related standards
- ISO 3696 (Water for analytical laboratory use) is referenced for reagent water quality.
- Prepared by ISO/TC 34 and adopted by CEN (EN ISO 17375:2006) for harmonized European application.
Keywords: aflatoxin B1, animal feeding stuffs, EN ISO 17375:2006, ISO 17375:2006, HPLC, post‑column derivatization, immunoaffinity column, feed testing, limit of quantification.
Технические детали
- SKU
- SIST EN ISO 17375:2006
Похожие стандарты
Упомянутые в описании и другие стандарты SIST
ISO 17375:2006
ДействующийAnimal feeding stuffs — Determination of aflatoxin B1
Overview - ISO 17375:2006 and aflatoxin B1 testing in feed ISO 17375:2006 specifies a validated laboratory method for the determination of aflatoxin B1 in animal feeding stuffs. The method uses rever…
SIST EN ISO 3696:1998
ДействующийWater for analytical laboratory use - Specification and test methods (ISO 3696:1987)
Overview EN ISO 3696:1995 (ISO 3696:1987) – "Water for analytical laboratory use – Specification and test methods" is a CEN-adopted international standard that defines quality grades, specification l…
SIST EN ISO 6338:2026
ДействующийMethod to calculate GHG emissions at LNG plant (ISO 6338:2023)
Overview SIST EN ISO 6338:2026 / ISO 6338:2023 establishes a standardized method for calculating greenhouse gas (GHG) emissions at liquefied natural gas (LNG) plants, both onshore and offshore. Devel…
SIST-TP CEN ISO/ASTM TR 52958:2026
Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…
Overview SIST-TP CEN ISO/ASTM TR 52958:2026 specifies a workflow for the detection of lack of fusion flaws during the additive manufacturing of metals using powder bed fusion-laser based (PBF-LB) pro…
SIST EN ISO 41002:2026
ДействующийFacility management - Development of the facility management organization (ISO 41002:2026)
Overview SIST EN ISO 41002:2026 - Facility management - Development of the facility management organization offers strategic guidance for building and developing robust facility management (FM) organ…
SIST EN ISO 844:2026
ДействующийRigid cellular plastics - Determination of compressive properties (ISO 844:2026)
Overview SIST EN ISO 844:2026 - Rigid Cellular Plastics: Determination of Compressive Properties (ISO 844:2026) provides standardized methods for measuring the compressive properties of rigid cellula…
SIST-TS CEN ISO/TS 17664-3:2026
ДействующийProcessing of health care products - Information to be provided by the medical device manufacturer for the pr…
Overview SIST-TS CEN ISO/TS 17664-3:2026 sets out comprehensive guidance for grouping reusable medical devices based on their cleaning requirements. This technical specification, prepared collaborati…
SIST EN ISO 8980-4:2026
ДействующийOphthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…
Overview SIST EN ISO 8980-4:2026 specifies requirements and test methods for the properties of anti-reflective coatings and hydrophobic coatings applied to uncut finished spectacle lenses. Developed…