SIST EN ISO 29470:2020 PDF

Name: SIST EN ISO 29470:2020 — Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)
SKU: SIST EN ISO 29470:2020
Price: 51.9 EUR
Availability: InStock

Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)

Название (английский):

SIST EN ISO 29470:2020

Thermal insulating products for building applications - Determination of the apparent density (ISO 29470:2020)

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 4 сентября 2020 г.
Издание:: ISO 29470:2020
ICS:: 17.060

Тип поставки:

Full version165 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

This document specifies the equipment and procedures for determining the apparent overall density and the apparent core density under reference conditions. This document is applicable to full size thermal insulating products and test specimens. This document can also be applied to the individual layers of multi‑layered products.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

SIST EN ISO 29470:2020 is an international standard developed by ISO and adopted by CEN, specifying the methods for determining the apparent density of thermal insulating products used in building applications. Accurate measurement of apparent overall density and apparent core density is critical to assessing the thermal performance and integrity of insulation materials. This standard applies to full-size thermal insulation products, test specimens, and individual layers of multi-layered products, providing a consistent framework for evaluating insulation density under controlled reference conditions.

Key Topics

Scope and Applicability

Applies to full-size thermal insulating products and test specimens.
Also applicable to individual layers of multi-layered insulation products.

Terminology

Apparent Overall Density (ρa): Includes mass per unit volume, with surface skins but excluding facings and coatings.
Apparent Core Density (ρc): Mass per unit volume of the core material, excluding surface skins, facings, and coatings.

Test Specimen Preparation

Test specimens should retain representative structural properties.
Specimens must be conditioned at specified temperature and humidity until constant mass is achieved.
Facings, coatings, and surface skins should be removed appropriately depending on which density is measured.

Test Procedure

Linear dimensions are measured using ISO 29465, ISO 29466, and ISO 29768 standards.
Mass is measured with an accuracy of 0.5%.
Volumes are calculated from linear measurements to derive density values.
Testing conditions typically maintained at 23 ± 2 °C and 50 ± 5% relative humidity unless specific regional variations apply.

Calculation and Reporting

Density calculated as mass divided by volume, expressed in kg/m³ with three significant figures.
Test reports must include product identification, test conditions, measurement results, and reference to SIST EN ISO 29470:2020.

Applications

Quality Control

Ensures consistency and quality of thermal insulation products during manufacturing and batch testing.
Identifies deviations in material density that might affect thermal conductivity and product performance.

Material Specification

Supports compliance with product standards and building codes that require specified density ranges for insulation.
Assists architects, engineers, and builders in selecting appropriate insulation materials based on validated density data.

Research and Development

Enables detailed analysis of multilayer insulation products to optimize layer properties and composite density.
Provides data crucial for improving insulation formulations and manufacturing techniques.

Certification and Regulatory Compliance

Aids manufacturers in meeting European and international requirements for thermal insulating materials.
Facilitates product certification processes by providing a standardized density determination method.

Related Standards

ISO 29465:2020 – Thermal insulating products for building applications - Determination of length and width

ISO 29466:2020 – Thermal insulating products for building applications - Determination of thickness

ISO 29768:2020 – Thermal insulating products for building applications - Determination of linear dimensions of test specimens

These interlinked standards complement SIST EN ISO 29470:2020 by defining precise measurement methods for dimensional properties necessary for the accurate calculation of apparent density.

Keywords: SIST EN ISO 29470:2020, apparent density, thermal insulating products, building applications, insulation density determination, ISO standards, thermal insulation testing, apparent overall density, apparent core density, insulation quality control, test specimens, thermal performance, building materials standard.

SIST EN ISO 29470:2020 PDF

Abstract

Похожие стандарты

Overview

Key Topics

Applications

Related Standards

Технические детали

ISO 29470:2020

Thermal insulating products for building applications — Determination of the apparent density

SIST EN ISO 29465:2022

Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)

SIST EN ISO 29466:2023

Thermal insulating products for building applications - Determination of thickness (ISO 29466:2022)

BS EN ISO 29768:2022

Thermal insulating products for building applications. Determination of linear dimensions of test specimens.