SIST EN ISO 4499-3:2016 PDF

Overview

EN ISO 4499-3:2016 (ISO 4499-3:2016) provides guidelines for metallographic measurement of microstructural features in sintered hardmetals - specifically Ti(C,N) based cermets and WC/cubic carbide hardmetals. The standard is focused on metallographic techniques using optical or electron microscopy and is intended for cemented carbides and cermets where the hard phase is primarily inorganic carbides and nitrides. Key measurement focus is phase size and distribution determined by the linear intercept technique.

Key Topics

• Scope and materials covered: Ti(C,N) cermets and WC-based hardmetals containing additional cubic carbides (e.g., TiC, TaC).
• Measurement principle: Use of the linear intercept technique to obtain representative mean phase sizes and distributions.
• Microscopy: Guidance for both optical microscopy and electron microscopy imaging and image sampling.
• Metallographic preparation: Recommended procedures for sample preparation and etching to reveal differences between WC and cubic phases and to produce analyzable microstructures.
• Size classification: Defined phase-size categories for carbonitride or cubic carbide phases:
  • Nano: < 0.2 µm
  • Ultrafine: 0.2–0.5 µm
  • Submicron: 0.5–0.8 µm
  • Fine: 0.8–1.3 µm
  • Medium: 1.3–2.5 µm
  • Coarse: 2.5–6.0 µm
  • Extra coarse: > 6.0 µm
• Sampling and representativity: Procedures for representative image selection, homogeneity assessment, and dealing with inhomogeneous materials.
• Calibration and uncertainty: Requirements for instrument calibration, measurement uncertainty evaluation, and proper reporting.
• Reporting: Minimum information to include in test reports to meet quality and traceability expectations.

Applications and Users

EN ISO 4499-3:2016 is practical for:

• Quality control and acceptance testing in hardmetal/carbide manufacturing.
• Materials R&D developing Ti(C,N) cermets or WC/cubic-carbide compositions.
• Metallography and failure analysis labs performing microstructural quantification.
• Standards bodies and certification labs requiring standardized microstructure measurement methods.

Typical uses:

• Quantifying hard-phase grain size for performance correlations (wear resistance, toughness).
• Comparing production lots and optimization of sintering or powder metallurgy processes.
• Producing traceable measurement reports for customer specifications or regulatory compliance.

Related Standards

• ISO 4499-1:2008 - Photomicrographs and description (metallographic reference images).
• ISO 4499-2:2008 - Measurement of WC grain size (complements linear-intercept methods).
• ISO 4499-4 - Characterisation of porosity, carbon defects and eta‑phase content (related microstructural aspects).

Keywords: EN ISO 4499-3:2016, ISO 4499-3, hardmetals, Ti(C,N) cermets, WC/cubic carbide, metallographic determination, linear intercept technique, cemented carbides, microstructure measurement.