SIST EN ISO 4869-3:2007 PDF

Overview

EN ISO 4869-3:2007 - "Acoustics - Hearing protectors - Part 3" specifies a laboratory method for measuring the insertion loss of ear‑muff type hearing protectors using an acoustic test fixture (ATF). Published by CEN/ISO, the standard is intended for investigating production variability and ageing effects, and for ensuring samples submitted for subjective attenuation tests (ISO 4869‑1) are representative of the type. It is explicitly not the basic type‑approval test and the results are not intended to represent real‑ear attenuation or the actual protection provided in use.

Key topics and technical requirements

• Measurement principle: insertion loss = difference (dB) between one‑third‑octave sound pressure levels measured in the ATF without and with the ear‑muff in place.
• Acoustic test fixture (ATF):
  • Cylindrical non‑magnetic body with centres of end faces (145 ± 1) mm apart and diameter (135 ± 5) mm; end faces inclined 4.5° ± 0.5°.
  • Measuring microphone: pressure condenser type, WS1P or WS2P in accordance with IEC 61094‑4.
  • Spacer to support headband: length (123 ± 1) mm with a rubber pad (6 ± 1) mm thick, hardness 30–85 IRHD; pad face (50 ± 1) mm × (77 ± 1) mm.
  • Pressure equalization methods (capillary tube options) to avoid cushion distortion during fitting.
• Acoustic isolation requirements: minimum isolation of 50 dB (63–250 Hz), 65 dB (315 Hz–4 kHz), and 55 dB for higher bands at the test site, measured with a sealed isolation test cup.
• Measurement environment: random incidence field or plane progressive wave of specified quality; noise floor, test signal and uncertainty considerations (see normative references).

Practical applications and users

Who uses EN ISO 4869‑3:2007:

• Acoustic test laboratories performing insertion loss characterization of ear‑muff products.
• Hearing protector manufacturers for production spread assessment and ageing studies.
• Certification bodies verifying sample representativeness before ISO 4869‑1 subjective testing.
• PPE compliance engineers and acoustic consultants assessing design consistency.

Practical benefits:

• Provides repeatable, standardized ATF-based method for comparative performance checks.
• Helps identify manufacturing variation or degradation over time without requiring human test subjects.
• Supports quality control, R&D and pre‑certification sample screening.

Related standards

• ISO 4869‑1 - Subjective method for sound attenuation (real‑ear).
• IEC 61094‑4 - Specifications for working standard microphones (WS1P/WS2P).
• ISO/IEC Guide 98 (GUM) - Uncertainty of measurement.
• IEC 61260, ISO 48 - referenced for filters and material hardness.

Keywords: EN ISO 4869-3:2007, acoustic test fixture, insertion loss, ear‑muff, hearing protectors, measurement method, ATF, ISO 4869-1, PPE testing.