SIST EN ISO 7711-2:2011 PDF

Overview

EN ISO 7711-2:2011 - "Dentistry - Rotary diamond instruments - Part 2: Discs" specifies requirements for diamond-coated rotary discs commonly used in the dental laboratory for cutting dental materials such as metals, ceramics, plastics and gypsum. This ISO/CEN harmonized standard (2011 edition) defines geometry, construction, mechanical requirements and performance-related limits for unmounted and mounted discs, and selects five specific disc shapes with their dimensions.

Key topics and technical requirements

• Scope: Diamond discs for dental laboratory cutting applications; five specific shapes and dimensions are given (see ISO 7711-2:2011, Clause 5).
• Bore diameter: Unmounted discs use a standardized bore diameter of 1.7 mm.
• Disc blank thickness: Minimum disc blank thickness (uncoated) is ≥ 0.05 mm. Preferred coated blank thicknesses include 0.15, 0.20, 0.25, 0.30, 0.45 mm.
• Outer diameters (preferred): ISO preferred nominal sizes include 160, 180, 200, 220 mm (Table 3 lists preferred sizes; other sizes optional).
• Material: Disc blanks shall be stainless steel; specific grade and treatment are manufacturer-defined.
• Minimum proof strength: Specified as ≥ 1000 MPa for very thin discs (≤ 0.1 mm) and ≥ 800 MPa for thicker blanks (> 0.1 mm) (Table 5).
• Diamond covering: Grain sizes and colour code follow ISO 7711-3. Width of coating is at manufacturer’s discretion but subject to specified tolerances.
• Run-out limits: Circular run-out - radial and axial (lateral) - of a mounted disc is limited to a maximum of 0.15 mm (measured per ISO 8325).
• Mounting/protrusion: Recommended protruding shank lengths for mounting mandrels (ISO 1797-1) are 10 mm (Type 1) and 15 mm (Type 2) to limit bending and run-out.
• Labeling & manufacturer info: Packaging and published media requirements are specified to support safe, traceable use.

Practical applications and users

• Dental laboratory technicians - selecting appropriate disc shape, grit and size for trimming, sectioning and finishing crowns, bridges, models and prosthetic components.
• Manufacturers of dental rotary instruments - design, production and quality control of diamond discs to meet dimensional, mechanical and run-out criteria.
• Procurement and quality managers - verifying compliance for incoming discs and ensuring compatibility with laboratory handpieces.
• Regulatory and standards professionals - referencing harmonized European/ISO requirements for product declarations and labeling.

Related standards

• ISO 7711-1 (general dimensions/requirements/marking)
• ISO 7711-3 (grit sizes, designation and colour code)
• ISO 1797-1 (shanks for rotary instruments)
• ISO 8325 (test methods for rotary instruments)
• ISO 6892-1 (tensile testing) and ISO 1942 (dentistry vocabulary)

This standard is essential for safe, consistent manufacture and use of rotary diamond discs in dental labs; referencing EN ISO 7711-2:2011 ensures interchangeability, performance and traceability.