SIST EN ISO 8291:2022 PDF

Overview

EN ISO 8291:2022 - "Vitreous and porcelain enamels - Method of test of self-cleaning properties (ISO 8291:1986)" specifies a comparative test method to evaluate the self-cleaning properties of vitreous and porcelain enamelled walls used in roasting devices, grills and baking devices. The standard defines how enamel surfaces absorb oil droplets and volatilize most of the oil by distillation, decomposition and combustion. It is explicitly not applicable to pyrolytically cleaning enamels.

Key topics and technical requirements

• Test principle: Apply defined drops of testing oil to enamelled specimens, heat cycles at controlled temperature, repeat until a visible surface gloss (non-volatile residue) appears; compare the number of cycles required for test and reference specimens.
• Testing oil: Refined household soya oil (fresh, ≤3 months old); store in closed container at 5–7 °C.
• Drop volume/mass and application:
  • Drops of about 20–25 mg produced with pipette/burette/syringe (ISO 648 referenced).
  • Template with five holes (15 mm diameter) and spacing feet used to place drops from a height of 20 mm.
• Thermal cycle: Specimens exposed in a ventilated muffle furnace (hot-air oven or baking oven) at 250 ± 10 °C for 1 hour then cooled to ambient (18–28 °C). Repeat cycles until gloss appears on at least three of five exposed areas.
• Assessment and comparison:
  • Use a specially prepared reference specimen produced per ISO 2723.
  • If the difference in number of cycles to gloss between test and reference is ≤ 1 cycle, specimens are considered to have the same self-cleaning performance.
  • The method is comparative and partly subjective (visual gloss assessment); results can be affected by oven draught and oil composition.
• Quality control note: When used for QC, coating thickness of test and reference specimens should not differ by more than 20 µm; self-cleaning enamels typically have coating thickness ≥ 150 µm.

Applications and users

Who benefits from EN ISO 8291:2022:

• Enamel manufacturers and formulators validating self-cleaning vitreous and porcelain enamels.
• Appliance manufacturers (ovens, grills, roasting and baking devices) specifying enamel performance.
• Independent testing and quality control laboratories performing comparative performance tests.
• Product specifiers, procurement teams and standards bodies requiring reproducible test methods for enamelled surfaces.

Practical applications:

• Quality control during production of self-cleaning enamel finishes.
• Comparative evaluation of enamel formulations and process changes.
• Performance verification for product claims related to ease of cleaning and oil resistance.

Related standards

• ISO 2723 - Production of specimens for vitreous and porcelain enamels for sheet steel.
• ISO 648 - Laboratory glassware - One-mark pipettes.
• EN ISO 8291:2022 is the CEN endorsement of ISO 8291:1986 and is intended for adoption by CEN member national bodies.