SIST ISO 2826:1996 PDF
Apricots -- Guide to cold storage
Apricots -- Guide to cold storage
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 3
- Дата публикации:
- 1 декабря 1996 г.
- ICS:
- 67.080.10
- Технический комитет:
- KŽP - Agricultural food products
Describes methods for obtaining conditions for the more or less prolonged cold storage. Details harvesting and treatment before storage and specifies the optimum storage conditions to be maintained with regard to temperature, relative humidity, air circulation and storage life. The annex refers to the limits of application of this guide and to the ecological effects and defects arising during storage.
Abstract
Overview
ISO 2826:1974 - Apricots: Guide to cold storage is an international guidance document describing accepted methods to achieve effective refrigerated storage of apricots. The standard covers pre‑storage harvesting and handling, recommended storage conditions (temperature, relative humidity, air circulation), storage life expectations, and preventive measures against biological and physiological defects. An annex details the standard’s limits of application, ecological influences and typical storage defects.
Key topics
- Harvesting criteria
- Fruit should be harvested with firm but juicy flesh, aromatic and, depending on variety, slightly acidic.
- Degree of maturity is variety dependent; growers must use local experience and sensory testing or penetrometers.
- Pre‑storage treatments
- Rapid cooling after harvest (ideally within 24 hours).
- Sanitation: disinfection of refrigeration rooms and packaging is recommended.
- Optional treatments: preliminary cooling in iced water, fumigation or fungicide use where permitted by national regulations.
- Wrapping packages (e.g., polyethylene) reduces moisture loss.
- Optimal storage conditions
- Temperature: recommended range around -0.5 to +0.5 °C. Some countries use higher temperatures (e.g., +5 to +8 °C) for special varieties, accepting a shorter storage life.
- Relative humidity: ~90% recommended; in some cases up to 95% to reduce weight loss.
- Air circulation: ensure uniform temperature and humidity throughout the storage room.
- Storage density: palletized stacks typically on the order of 100 kg/m³ (approximate guidance given in the document).
- Storage life
- For suitable varieties under favourable conditions expect about 2 weeks, with up to 4 weeks biologically possible when all parameters are optimized.
- Controlled atmospheres
- Use of modified or controlled atmospheres is recommended to extend storage life, with oxygen and carbon dioxide concentrations adjusted by variety and orchard conditions.
- Post‑storage handling
- Gradual warming after removal from cold storage to avoid condensation; prompt consumption or processing is advised.
Applications and users
ISO 2826:1974 is practical for:
- Apricot growers and packing houses planning postharvest handling.
- Cold storage operators and logistics providers handling fresh fruit.
- Postharvest technologists, quality managers and exporters seeking to minimize weight loss and storage defects.
- Food processors (canning, freezing) deciding on temporary storage and conditioning.
Related standards
- ISO 2169 - referenced for physical definitions and measurement methods related to refrigeration rooms and storage conditions.
Keywords: ISO 2826:1974, apricots cold storage, apricot storage conditions, refrigerated storage, postharvest handling, controlled atmosphere, storage temperature, relative humidity.
Технические детали
- SKU
- SIST ISO 2826:1996
Похожие стандарты
Упомянутые в описании и другие стандарты SIST
ISO 2826:1974
ДействующийApricots — Guide to cold storage
Overview ISO 2826:1974 - Apricots: Guide to cold storage is an international guidance document describing accepted methods to achieve effective refrigerated storage of apricots. The standard covers p…
SIST ISO 2169:1996
ДействующийFruits and vegetables -- Physical conditions in cold stores -- Definitions and measurement
Overview ISO 2169:1981 - "Fruits and vegetables - Physical conditions in cold stores - Definitions and measurement" standardizes the physical factors and measurement practices used in industrial cold…
SIST EN ISO 6338:2026
ДействующийMethod to calculate GHG emissions at LNG plant (ISO 6338:2023)
Overview SIST EN ISO 6338:2026 / ISO 6338:2023 establishes a standardized method for calculating greenhouse gas (GHG) emissions at liquefied natural gas (LNG) plants, both onshore and offshore. Devel…
SIST-TP CEN ISO/ASTM TR 52958:2026
Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…
Overview SIST-TP CEN ISO/ASTM TR 52958:2026 specifies a workflow for the detection of lack of fusion flaws during the additive manufacturing of metals using powder bed fusion-laser based (PBF-LB) pro…
SIST EN ISO 41002:2026
ДействующийFacility management - Development of the facility management organization (ISO 41002:2026)
Overview SIST EN ISO 41002:2026 - Facility management - Development of the facility management organization offers strategic guidance for building and developing robust facility management (FM) organ…
SIST EN ISO 844:2026
ДействующийRigid cellular plastics - Determination of compressive properties (ISO 844:2026)
Overview SIST EN ISO 844:2026 - Rigid Cellular Plastics: Determination of Compressive Properties (ISO 844:2026) provides standardized methods for measuring the compressive properties of rigid cellula…
SIST-TS CEN ISO/TS 17664-3:2026
ДействующийProcessing of health care products - Information to be provided by the medical device manufacturer for the pr…
Overview SIST-TS CEN ISO/TS 17664-3:2026 sets out comprehensive guidance for grouping reusable medical devices based on their cleaning requirements. This technical specification, prepared collaborati…
SIST EN ISO 8980-4:2026
ДействующийOphthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…
Overview SIST EN ISO 8980-4:2026 specifies requirements and test methods for the properties of anti-reflective coatings and hydrophobic coatings applied to uncut finished spectacle lenses. Developed…