Найдено: 53
Overview ISO 9187-2:2010 is an international standard established by the International Organization for Standardization (ISO) that specifies requirements for one-point-cut (OPC) ampoules used as inje…
Overview ISO 9182-4:2023 - "Tools for pressing - Guide pillars - Part 4: Type C, pillars with taper lead and bush" - is the fourth edition international standard that defines the geometry, tolerances…
Overview ISO 9183-2:2011 is an international standard developed by the International Organization for Standardization (ISO) that specifies the basic dimensions, tolerances, and key characteristics of…
Overview ISO 9185:2007 - Protective clothing: Assessment of resistance of materials to molten metal splash specifies a laboratory test method to assess the heat-penetration resistance of materials in…
Overview ISO 9184-7:1994 (Paper, board and pulps - Fibre furnish analysis - Part 7) specifies two standard methods to determine the fibre weight factor used in furnish analysis. The weight factor is…
Overview ISO 9184-1:2023 - "Paper, board and pulps - Fibre furnish analysis - Part 1: General method" defines the general laboratory procedure for determining the fibre composition of papers, boards…
Overview ISO 918:1983 - Volatile Organic Liquids for Industrial Use - Determination of Distillation Characteristics provides a standardized method for determining the distillation characteristics of…
Overview ISO 9187-1:2010 - "Injection equipment for medical use - Part 1: Ampoules for injectables" specifies requirements for glass ampoules used as primary packaging for injectable pharmaceutical p…
Overview ISO 9186-1:2014 - Graphical symbols - Test methods - Part 1: Method for testing comprehensibility - defines a standardized procedure for evaluating how well a graphical symbol communicates i…
Overview ISO 9184-6:1994 is an international standard developed by the International Organization for Standardization (ISO) as part of the broader ISO 9184 series, focusing on fibre furnish analysis…
Overview ISO 9182-5:2023 defines requirements for Type D end-locking guide pillars with flange used in press tools. The standard specifies the required dimensions and tolerances, gives guidance on ma…
Overview ISO 9186-2:2008 - Graphical symbols - Test methods - Part 2: Method for testing perceptual quality - specifies a standardized empirical procedure to verify that the elements of a graphical s…
Overview ISO 9180:1988, "Black leads for wood-cased pencils - Classification and diameters," is an International Standard from ISO/TC 10 (Technical drawings) that defines how black pencil leads (grap…
Overview ISO 9188:1993 specifies the characteristics and dimensions for straight-sided, single-action mechanical power presses with nominal forces from 400 kN up to and including 4 000 kN. The standa…
Overview ISO 9182-3:2023 - Tools for pressing - Guide pillars - Part 3: Type B, end-locking pillars - specifies the dimensions, tolerances, material guidance, hardness and designation rules for Type…
Overview ISO 9184-4:1990 - "Paper, board and pulps - Fibre furnish analysis - Part 4: Graff 'C' staining test" specifies the preparation, use and colour reactions of the Graff “C” stain for microscop…
Overview ISO 9184-2:1990 - Paper, board and pulps - Fibre furnish analysis - Part 2: Staining guide is the part of the ISO 9184 series that helps laboratories select the appropriate staining tests fo…
Overview ISO 9186-3:2014 - Graphical symbols - Test methods - Part 3: Method for testing symbol referent association - specifies a standardized procedure to assess whether graphical symbols (especial…
Overview ISO 9184-5:1990 is an international standard that specifies the Lofton-Merritt staining test for fibre furnish analysis in paper, board, and pulps. This test is a modification of the Wisbar…
Overview ISO 9182-2:2023 is an international standard developed by the International Organization for Standardization (ISO) that specifies the dimensions, tolerances, materials, and hardness requirem…
Overview ISO 9185:2025 - "Protective clothing - Assessment of resistance of materials to molten metal splash" specifies a laboratory method to assess the heat penetration resistance of materials used…
Overview ISO 9181:2007 is an international standard published by ISO that specifies the dimensions and tolerances for round punches featuring a 60° conical head and reduced shank. This standard preci…
Overview ISO 9183-1:2008 sets out the essential requirements for wear plates used in press dies-specifically, Type A wear plates. Developed by the International Organization for Standardization (ISO)…
Overview ISO 9182-1:2023 is an international standard published by ISO that specifies the types and mounting methods of guide pillars used in pressing tools. Guide pillars are critical components in…
Overview ISO 9184-3:1990 specifies the Herzberg staining test used in fibre furnish analysis for paper, board and pulps. It defines preparation, use and colour reactions of the Herzberg stain and is…
Overview ISO 9189:1993 specifies the characteristics and dimensions for straight-sided high-speed mechanical power presses with nominal forces from 250 kN up to and including 4 000 kN. The standard c…
1 Scope This International Standard specifies the dimensions and tolerances, in millimetres, for round punches with a 60° conical head and reduced shank, having shank diameters D 1 of 2 mm or 3 mm. I…
What is ISO 9182 ‑ 4 about? ISO 9182 ‑ 4 is part fourth of the multi-series standard that specifies the dimensions and tolerances of guide pillars, type C, with taper lead and bush, intended for use…
1 Scope This part of ISO 9186 specifies a method for testing the perceptual quality of graphical symbols , to verify that the elements that constitute a graphical symbol are readily identifiable by t…
1 Scope This part of ISO 9186 specifies a method for testing the referent association of graphical symbols intended to communicate information to users who are familiar with what the symbol is intend…
1 Scope This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type D, end-locking pillar with flange, intended for use in press tools. It gives guidance on…
1 Scope This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type B, intended for use in press tools. These guide pillars can be end-locking, type B1 (see…
1 Scope This part of ISO 9187 specifies materials, dimensions and requirements for forms of one-point-cut (OPC) ampoules (forms B, C and D) for injectables. Ampoules complying with this part of ISO 9…
1 Scope This part of ISO 9186 specifies a method for testing the comprehensibility of graphical symbols. It provides a measure of the extent to which a variant of a graphical symbol communicates its…
1 Scope This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type C, with taper lead and bush, intended for use in press tools. It gives guidance on the ma…
1 Scope This part of ISO 9182 specifies the dimensions and tolerances, in millimetres, of guide pillars, type A, intended for use in press tools. These guide pillars can be straight, type A1 (see Fig…
1 Scope This part of ISO 9183 specifies the basic dimensions and tolerances, in millimetres, of wear plates, type B, intended for use mainly in large presses. lt also specifies the size and positions…
1 Scope This part of ISO 9187 specifies materials, dimensions, capacities, performance and packaging requirements for three forms of glass ampoule (forms B, C and D) for injectable pharmaceutical pro…
1 Scope This part of ISO 9183 specifies the basic dimensions and tolerances in millimetres of wear for press dies, type A, intended for use mainly in large press dies. It also specifies the size and…
1 Scope This part of ISO 9182 illustrates four main types of guide pillars and their methods of mounting.
What is ISO 9182 ‑ 3 about? ISO 9182 ‑ 3 is part three of the multi-series standard that specifies the dimensions and tolerances of guide pillars, type B, intended for use in press tools. These guide…
What is ISO 9182 ‑ 5 about? ISO 9182 ‑ 5 is part five of the multi-series standard that specifies the dimensions and tolerances of guide pillars, type D, end-locking pillar with flange, intended for…
1 Scope This International Standard specifies a method for assessing the heat penetration resistance of materials intended for use in clothing to protect against large splashes of molten metal. It pr…