SIST ISO 4898:2020 PDF

Overview

ISO 4898:2018 - Rigid cellular plastics - Thermal insulation products for buildings - Specifications provides standardized requirements and test methods for rigid cellular plastic insulation boards used in buildings. It applies to flat or profiled boards (with or without natural skins) and to faced or laminated products made from phenolic (PF), expanded polystyrene (EPS), extruded polystyrene (XPS) and polyurethane/urethane-isocyanurate (PUR) foams. The standard is intended to define limiting quality values for purchaser–supplier specifications and does not replace engineering design calculations. It excludes pipe/vessel insulation and materials intended primarily for acoustic insulation.

Key topics and technical requirements

• Material scope: PF, EPS, XPS, PUR rigid cellular plastics in board form, with optional facings (foil, metal, plastic, mineral coatings, paper, etc.).
• Product categories: Three performance categories (I, II, III) for non-load-bearing, limited load-bearing and load-bearing applications; further divided into thermal-conductivity subcategories (A, B, C).
• Dimensional tolerances: Length, width, squareness and thickness tolerances are specified (see tables in the standard); more restrictive tolerances may be agreed between purchaser and supplier.
• Physical-property limits: Limiting quality values for thermal conductivity, density, compressive strength, dimensional stability, compressive creep, water vapour permeability, water absorption and flexural strength. These values are for specification purposes only.
• Test methods and sampling: References and required methods for linear dimensions, density, compressive strength, thermal conductivity (initial and long-term ageing), dimensional stability, compressive creep (including elevated temperatures), water vapour transmission, water absorption and bending - with sampling and conditioning rules (sample panels conditioned ≥28 days; specimens conditioned per specified temperature/RH before testing).
• Burning characteristics: Burning/smouldering behavior should be considered per national practice until dedicated international fire-performance standards apply.
• Conformity, labelling and reporting: Procedures for conformity control, product marking and test reporting to support purchaser–supplier agreements.

Applications and users

ISO 4898:2018 is used by:

• Manufacturers specifying production tolerances, test procedures and quality criteria for rigid foam insulation boards.
• Suppliers and purchasers formalizing contractual specifications for building insulation products.
• Test laboratories performing standardized assessments of thermal and mechanical properties.
• Specifiers, architects and contractors who need to verify that supplied boards meet agreed quality limits (note: not for structural or thermal design values).

Practical applications include wall insulation, cavity insulation, built-up roofs, underfloor insulation, cold-storage floors and other building envelope uses where rigid foam boards are appropriate.

Related standards

ISO 4898 references and works with a suite of test-method standards, including (among others):

• ISO 1923 (linear dimensions), ISO 845 (density), ISO 844 (compressive properties), ISO 1209-1 (bending), ISO 8301 / ISO 8302 (thermal resistance), ISO 11561 (long-term thermal ageing), ISO 2796 (dimensional stability), ISO 1663 (water vapour), ISO 2896 (water absorption), ISO 7616/7850 (compressive creep).

Keywords: ISO 4898:2018, rigid cellular plastics, thermal insulation products, EPS, XPS, PUR, phenolic foam, building insulation, thermal conductivity, compressive strength, dimensional stability, test methods, standards.