Найдено: 31
Overview ISO 1658:2022 - Natural rubber (NR): Evaluation procedure is the international standard that defines laboratory methods for assessing raw natural rubber. The standard specifies sampling, pre…
Overview ISO 16584:2002 defines the international standard for open end blind rivets with break pull mandrels and protruding heads, made from a nickel copper (NiCu) body combined with either steel (S…
Overview ISO 16585:2002 defines dimensional and mechanical characteristics and application data for closed end blind rivets with a break pull mandrel and a protruding head. The standard covers rivets…
Overview ISO 16588:2002 - "Water quality - Determination of six complexing agents - Gas‑chromatographic method" specifies a validated GC-based procedure for quantifying six water‑soluble organic comp…
Overview ISO 16589-2:2011 defines the standard vocabulary for rotary shaft lip‑type seals incorporating thermoplastic sealing elements (for example, PTFE-based compounds) intended for use under low‑p…
Overview ISO 16587:2004 is an international standard focused on the condition monitoring of stationary structures through mechanical vibration and shock analysis. Developed by the International Organ…
Overview ISO 16581:2014 is an international standard that defines a reliable method for assessing the durability of resilient and laminate floor coverings under mechanical stress caused by the simula…
Overview ISO 16582:2002 defines the specifications for open end blind rivets featuring a break pull mandrel and a protruding head. These rivets have a copper (Cu) body combined with a mandrel made of…
Overview ISO 16589-4:2011 defines performance test procedures for rotary shaft lip-type seals that incorporate thermoplastic sealing elements (for example, PTFE-based compounds). As Part 4 of the ISO…
Overview ISO 16589-1:2011 establishes key requirements for rotary shaft lip-type seals that incorporate thermoplastic sealing elements, such as those made from polytetrafluoroethylene (PTFE). The sta…
Overview ISO 16589-5:2011 is the part of the ISO 16589 series that defines and classifies typical visual imperfections in rotary shaft lip-type seals that incorporate thermoplastic sealing elements (…
Overview ISO 16586:2003 defines a gravimetric method for determining soil water content expressed as a volume fraction (volumetric water content) using a known dry bulk density. The standard applies…
Overview ISO 16589-3:2011 provides practical guidance for the storage, handling and installation of rotary shaft lip-type seals incorporating thermoplastic sealing elements (for example PTFE-based se…
Overview ISO 16583:2002 defines dimensional, mechanical and application data for open end blind rivets with a break‑pull mandrel and countersunk head. It covers rivets with a copper (Cu) body and man…
1 Scope This International Standard specifies — physical and chemical tests on raw natural rubbers; — standard materials, standard test formulae, equipment and processing methods for evaluating the v…